Merge branch 'master' of https://lab.neuronfarm.net/nomad/wiki-system.wiki

PF-and-Fail2ban-on-FreeBSD.md

@@ -0,0 +1,64 @@
+
+
+With the firewall configured, it was time to set up Fail2ban. It can be installed from pkg, along with pyinotify for kqueue support.
+
+~~~
+pkg install py37-fail2ban-0.11.1_2
+pkg install py37-pyinotify-0.9.6
+~~~
+
+The default configuration is in /usr/local/etc/fail2ban/jail.conf, and overrides should be put in jail.local. First I needed to tell Fail2ban to use PF.
+
+~~~
+[DEFAULT]
+banaction = pf
+~~~
+
+his refers to the file /usr/local/etc/fail2ban/action.d/pf.conf, which adds banned IP addresses to a PF table called fail2ban. This on its own doesn’t do anything but register the address with PF, so I needed to add a rule to pf.conf to block the traffic.
+
+~~~
+table <fail2ban> persist
+block in quick from <fail2ban>
+~~~
+
+I added this rule directly below block in all so that it took precedence over my ICMP rules.
+
+Back to Fail2ban, I enabled the SSH jail, which watches for failed logins in /var/log/auth.log.
+
+~~~
+[sshd]
+enabled = true
+~~~
+
+Then I reloaded the PF configuration and started Fail2ban.
+
+~~~
+service pf reload
+echo 'fail2ban_enable="YES"' >> /etc/rc.conf
+service fail2ban start
+~~~
+
+To see it in action, I can tail the Fail2ban log, list the addresses in the fail2ban table, and inspect the statistics for my PF rules.
+
+~~~
+tail /var/log/fail2ban.log
+pfctl -t fail2ban -T show
+pfctl -v -s rules
+~~~
+
+My final jail.local looks like this:
+
+~~~
+[DEFAULT]
+bantime = 86400
+findtime = 3600
+maxretry = 3
+banaction = pf
+
+[sshd]
+enabled = true
+~~~
+
+
+https://www.sqlpac.com/fr/documents/linux-ubuntu-fail2ban-installation-configuration-iptables.html
+https://cmcenroe.me/2016/06/04/freebsd-pf-fail2ban.html

encrypt-swap-Ubuntu-20.04.md

@@ -69,6 +69,35 @@ GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
 root@laptop:/root# update-grub
 ~~~
 
+## disable encrypted swap
+
+~~~
+root@laptop:/root# swapoff -a
+root@laptop:/root# cryptsetup close cryptswap
+root@laptop:/root# mkswap /dev/nvme0n1p2
+root@laptop:/root# printf "RESUME=/dev/nvme0n1p2" | tee /etc/initramfs-tools/conf.d/resume
+root@laptop:/root# update-initramfs -u -k all
+root@laptop:/root# update-grub
+
+~~~
+
+* ajust /etc/fstab to
+
+~~~
+/dev/nvme0n1p2  none    swap    discard 0       0
+#/dev/mapper/cryptswap  none    swap    discard 0       0
+~~~
+
+* check 
+
+~~~
+root@laptop:/root# swapon -a
+root@laptop:/root# swapon --summary
+Nom de fichier				Type		Taille	Utilisé	Priorité
+/dev/nvme0n1p2                         	partition	32653308	0	-2
+root@laptop:/root# 
+~~~
+
 ### to be solve
 
 ~~~

full-zfs-ecrypt-uefi-boot-trouble.md

@@ -0,0 +1,119 @@
+## Fixing Debian/Ubuntu UEFI boot manager with Debian/Ubuntu Live
+
+source : [Code Bites](https://emmanuel-galindo.github.io/en/2017/04/05/fixing-debian-boot-uefi-grub/)  
+
+Steps summary:  
+
+- Boot Debian Live
+- Verify Debian Live was loaded with UEFI
+- Review devices location and current configuration
+- Mount broken system (via chroot)
+- Reinstall grub-efi
+- Verify configuration
+- Logout from chroot and reboot
+
+### Verify Debian Live was loaded with UEFI :  
+
+~~~
+FromLive $ dmesg | grep -i efi 
+~~~
+
+~~~
+FromLive $ ls -l /sys/firmware/efi | grep vars
+~~~
+
+### Mount broken system (via chroot)
+
+Mounting another system via chroot is the usual procedure to recover broken system’s. Once the chroot comand is issues, Debian Live will treat the broken system’s “/” (root) as its own. Commands run in a chroot environment will affect the broken systems filesystems and not those of the Debian Live.  
+
+#### My system is full ZFS
+
+You have to add *-f* to force import because zfs think he should be on an other system.  
+*-R* is to use an altroot path.  
+
+~~~
+FromLive $ sudo su
+FromLive # zpool import -f -R /mnt rpool
+~~~
+
+~~~
+FromLive # zfs mount rpool/ROOT/ubuntu_myid
+~~~
+
+I'm in the case where ny zpool is encrypt !  
+
+see : [zfs trouble encrypt zpool](zfs-trouble-live-boot-solution)
+
+### Prepare chroot env
+
+Mount the critical virtual filesystems with the following single command:
+
+~~~
+FromLive # for i in /dev /dev/pts /proc /sys /run; do sudo mount -B $i /mnt$i; done
+~~~
+   
+Mount all zfs file system on rpool.   
+   
+~~~
+FromLive # zfs mount -a
+~~~
+   
+Chroot to your normal (and broken) system device
+
+~~~
+FromLive # chroot /mnt
+~~~
+
+import also bpool but do not mount it *-N* :  
+
+~~~
+InsideChroot # zpool import -N bpool
+~~~
+
+Mount your EFI partition:  
+
+~~~
+InsideChroot # mount -a
+~~~
+
+You should see :  
+
+* all your rpool zfs vol
+* /boot from your bpool.  
+* Your efi partition.  
+
+~~~
+InsideChroot # df -h
+Sys. de fichiers                                 Taille Utilisé Dispo Uti% Monté sur
+udev                                                16G       0   16G   0% /dev
+tmpfs                                              3,2G    1,8M  3,2G   1% /run
+rpool/ROOT/ubuntu_19k4ww                           272G    3,7G  269G   2% /
+bpool/BOOT/ubuntu_19k4ww                           1,2G    270M  929M  23% /boot
+rpool/USERDATA/yourlogin_43xnpb                    280G     12G  269G   5% /home/yourlogin
+rpool/USERDATA/root_43xnpb                         269G    640K  269G   1% /root
+rpool/ROOT/ubuntu_19k4ww/srv                       269G    128K  269G   1% /srv
+rpool/ROOT/ubuntu_19k4ww/var/lib                   269G     34M  269G   1% /var/lib
+rpool/ROOT/ubuntu_19k4ww/var/log                   269G     47M  269G   1% /var/log
+rpool/ROOT/ubuntu_19k4ww/var/spool                 269G    128K  269G   1% /var/spool
+/dev/nvme0n1p1                                     511M     16M  496M   4% /boot/efi
+rpool/ROOT/ubuntu_19k4ww/var/games                 269G    128K  269G   1% /var/games
+rpool/ROOT/ubuntu_19k4ww/var/snap                  269G    128K  269G   1% /var/snap
+rpool/ROOT/ubuntu_19k4ww/var/mail                  269G    128K  269G   1% /var/mail
+rpool/ROOT/ubuntu_19k4ww/usr/local                 269G    256K  269G   1% /usr/local
+rpool/ROOT/ubuntu_19k4ww/var/www                   269G    128K  269G   1% /var/www
+rpool/ROOT/ubuntu_19k4ww/var/lib/AccountsService   269G    128K  269G   1% /var/lib/AccountsService
+rpool/ROOT/ubuntu_19k4ww/var/lib/NetworkManager    269G    256K  269G   1% /var/lib/NetworkManager
+rpool/ROOT/ubuntu_19k4ww/var/lib/apt               269G     77M  269G   1% /var/lib/apt
+rpool/ROOT/ubuntu_19k4ww/var/lib/dpkg              269G     41M  269G   1% /var/lib/dpkg
+/dev/nvme0n1p1                                     511M     16M  496M   4% /boot/efi
+~~~
+
+### Reinstall grub-efi
+
+~~~
+InsideChroot # apt-get install --reinstall grub-efi
+~~~
+
+~~~
+InsideChroot # update-grub
+~~~

zfs-trouble-live-boot-solution.md

@@ -1,3 +1,9 @@
+---
+format: markdown
+toc: no
+title: zfs trouble encrypt zpool
+...
+
 # zfs trouble live boot solution
 ## zpool trouble you can mount it from live systeme