wiki-system/disable-encrypt-swap-partit...

72 lines
1.6 KiB
Markdown

# disable encrypt swap partition
## prerequisite
* This setup is based on [encrypt swap partition](./encrypt-swap-Ubuntu-20.04)
* all command bellow are run has root
## disable encrypt swap partition
* Turn off swap
~~~
root@laptop:/root# swapoff /dev/mapper/cryptswap
~~~
* Undo the existing mapping.
~~~
root@laptop:/root# cryptsetup luksClose /dev/mapper/cryptswap
~~~
* remove your encrypt swap device define in your **/etc/crypttab**
* ajust **/etc/fstab** to use your real swap partition
~~~
/dev/nvme0n1p2 none swap discard 0 0
~~~
* make your partition a swap
~~~
root@laptop:/root# mkswap /dev/nvme0n1p2
~~~
* activate swap
~~~
root@laptop:/root# swapon -a
~~~
* remove file */etc/initramfs-tools/conf.d/resume*
~~~
root@laptop:/root# rm /etc/initramfs-tools/conf.d/resume
~~~
Register these changes.
~~~{bash}
root@laptop:/root# update-initramfs -u -k all
update-initramfs: Generating /boot/initrd.img-5.4.0-37-generic
cryptsetup: ERROR: Couldn't resolve device rpool/ROOT/ubuntu_0ctpm6
cryptsetup: WARNING: Couldn't determine root device
I: The initramfs will attempt to resume from /dev/nvme0n1p2
I: (UUID=09c1daa8-a572-41b9-8655-c38ea7778723)
I: Set the RESUME variable to override this.
root@laptop:/root#
~~~
* Change your /etc/default/grub GRUB_CMDLINE_LINUX_DEFAULT to point to your real partition
~~~
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash resume=UUID=09c1daa8-a572-41b9-8655-c38ea7778723"
~~~
~~~
root@laptop:/root# update-grub
~~~
Next you need to reboot to enable everything and test it.